Installation method of swinging screen

    The installation of the swing screen is very simple, the general screen machine has been debugging completed in the factory, the user only needs to simple assembly to the site, plug in can be used, the following is a brief explanation of the installation points:

(1) The first choice is to install a support or hanging device. When installing, it is necessary to level the bottom, mainly to ensure the level of the ground when the swinging screen is working.

(2) Adjust the feed and discharge ports, these interfaces can be flexibly adjusted, and adjusted to the appropriate position, tighten the tensioning device can be.

(3) Install and fix the screen surface as required.

(4) Check the fixing of the connected parts of the screen (such as the motor, the screen mesh, etc.), and the screen should be evenly tensioned to prevent local vibration. Check the lubrication of the transmission part, whether the wiring of the motor and the control box is correct, and rotate the transmission part by hand to see whether the operation is normal.

(5) Plug in and turn on the machine to test it, and ready to use.